Setup
● Hold down the power button on the left side of the terminal.
● Once the terminal powers on and the Dejavoo screen is displayed, select the apps icon
at the bottom of the screen.
● From there, select the DvPayLite application.
WiFi Setup
● Once the application has loaded, the terminal will ask you to configure the WiFi
connection. Select Configure.
● Select the WIFI icon, toggle the switch at the top of the screen to ON, and select
CONFIGURE
● Select the Wi-Fi network, enter the password, and Connect.
● Press the back arrow twice to get to the Upgrade App Screen.
Terminal Download
● The terminal will now prompt to enter the TPN number.
● Once the TPN has been entered, Select Download App and OK.
Time & Date Configuration
● From the main sale screen, select the Red Gear Icon in the bottom left corner of the screen.
● Input Password (Last 4 of the TPN. This will be shown on the screen).
● Select “Display & Time”.
● Change the Time Zone to the store's location and select the Green Checkmark in the top right corner to save the changes.
SIM Card Setup
1. Swipe down from the top of the screen once and select the white gear icon.
2. Scroll to the bottom of the settings screen until you find About Device.
3. Select Status.
4. Select IMEI information.
5. Note the IMEI (Slot1) number in the EAZE - Terminal/SIM Card spreadsheet.
6. List the SIM card ICCID with the associated terminal SN, TPN, and IMEI.
● Take the SIM Card and pop out the smallest size.
● Remove the Back Cover and Battery from the terminal.
● Insert the SIM Card into the top slot covered in metal. The cutoff corner should be in the
bottom left corner of the tray.
● Power on the terminal by holding the power button on the left side.
● When prompted, select Configure and Configure again.
Under APN Name: type iot0119.com.attz. Select the green checkmark in the top right
corner.
● Swipe down from the top of the screen and select the Gear Icon.
● Scroll down and select SIM Cards.
● Press the back arrow and select More.
● Select Access Point Names.
● Press the + button in the top right corner.
● Set the following parameters.
○ Name: ATT
○ APN: iot0119.com.attz
○ MCC: 270
○ MNC: 01
● Select the 3 dots in the top right corner and Save.
● Hold down the Power Button on the left side of the terminal and select Reboot.
● Once booted back up select the data icon in the top right corner and Check the
connection of GPRS.
